Coal Mine Used EP Fabric Conveyor Belt
1. We can manufacture according to the request or sample we found, two research and development centers, one of which is cooperating with the university.
2. Type: Nn/ep/Cotton Conveyor Belt, Chevron Conveyor Belt, Endless Conveyor Belt
Heat-resistant conveyor belt (120 cd, 150 degrees, 180 cd);
cold-resistant conveyor belt (-50 degrees);
High Temperature Resistant Conveyor Belt (200-500 degrees)
acid and alkali resistant conveyor belts; Oil-resistant conveyor belt
DPEM Conveyor Belt (Very Suitable for Cement Plant)
3. Width: 300~2600mm
4. Tensile strength: 8MPa-24MPa
5. Abrasion: 350mm3-90mm3
6. Standard: Din22102 (dinw, dinx, diny, dinz, dink)
Rma (rma ⅞,rma ⅞)
As1332 (m24,n17)
Sans 1173 (a、c、m、n)
GB7984-87
7. Fabric: Cotton or polyester - cotton, EP80--EP630, NN80-NN630
8. We manufacture many conveyor belts as the following requirements.
| commodity | unit | Cover rubber products | ||||||||
| dinner | Dinx | Chibiko | Dinz | Rma ⅞ | Rma ⅞ | |||||
| Tensile strength or more | N/mm2 | 18 | 25 | 20 | 15 | 17 | 14 | |||
| More than elongation at break | % | 400 | 450 | 400 | 350 | 400 | 350 | |||
| abrasion | Mm3 | 90 | 120 | 150 | 250 | 175 | 250 | |||
9.Useage: It is suitable for conveying materials under medium or long distance and heavy load and high speed conditions.
10. Type: according to the characteristics of the covered rubber,
General belt, heat resistance, fire resistance, cold resistance, acid resistance,
Oil Resistance
11. Character:
(1) Under standard load conditions, the diffusion rate is small, and the diffusion rate during use is small.
(2) The flexibility is good. As a result, you can easily make a trough.
(3) Resistant to impact and abrasion.
(4) Good water resistance. If it is damp or in water, it can be used without water.
Loss of strength
(5) The greater the number of modes in the EP, the more the design of the conveyor belt is made,
It is highly secure.
(6) High heat resistance.
(7) No mold corrosion
