The solution of common problems in the process of white corundum smelting

White corundum is actually a material used to make abrasives or abrasives, so the performance of all aspects is very excellent, in addition, white corundum has some other uses. In short, the excellent performance of the white corundum instrument is accepted by the majority of users. However, white corundum in the process of smelting or inevitable there will be some problems, how to solve these problems has become the focus of our research, that may wish to learn the following content, should be helpful.
In the smelting process, the phenomenon of shooting in the equipment, through a series of reasons to find later found that this is due to the equipment in the air pressure is too large or the furnace bottom, furnace lining, raw materials are titanium wet caused. In this regard, the first thing to do is to prevent the bottom of the furnace wet, but also to control the water content of raw materials; And you have to control the pressure in the equipment.
There is another kind of problem is also more common, that is string furnace. Because the molten liquid flows rapidly back and forth in the solid powder, it will stir up a large amount of aluminum oxide powder, which is the so-called series furnace phenomenon. After the analysis of its reasons, in the future processing process as far as possible to use a lower voltage, and expand the melting surface, increase the amount of liquid. Only all aspects are in place to ensure the smooth smelting of white corundum.