Smelting And Development Of Brown Corundum

Over the years, the smelting process of brown corundum has made many improvements with the development of production, and the design level has made considerable progress, not to mention the change of material transport mode, only the furnace type change has frit method and tipping method. The furnace body of the corundum tipping furnace is a thin shell structure that can be tilted, which has the characteristics of heavy load, high temperature and tilting. When working, it not only bears static and dynamic mechanical stress but also bears thermal stress load day. With the development of the furnace type, the supporting facilities on the furnace are also improved with the continuous improvement of operation and energy saving requirements. The traditional mechanical dumping mechanism is installed on the foundation except for the final stage big gear suspended on the trunnion shaft. This transmission mode will destroy the normal bite of the final stage gear pair after the trunnion shaft is bent, resulting in serious wear or break of the gear, which will jeopardize the safety of production. Compared with it, hydraulic transmission has many advantages, so hydraulic transmission is widely used in the field of brown corundum smelting. Hydraulic transmission is a form of transmission in which the liquid is used as the working medium for energy transfer. Through the energy conversion device (hydraulic pump), the mechanical energy of the primary motor (motor) is transformed into the pressure energy of the liquid, and then through the closed pipeline, control components, etc., the pressure energy of the liquid is transformed into mechanical energy by another energy device (hydraulic cylinder, hydraulic motor). To drive the load and achieve the linear or rotational motion required by the actuator.